Skip to main content
Log in
Texas Instruments RC4558PSR — Analog & Data Acquisition

RC4558PSR Dual General-Purpose Op-Amp, 3 MHz, 1.7 V/µs

MPNRC4558PSR
Active

Texas Instruments RC4558PSR, dual general-purpose operational amplifier, 3 MHz gain bandwidth, 1.7 V/µs slew rate, 10 V to 30 V supply span, 0°C to 70°C, 8-SOIC surface mount package.

$0.1434Ref. price · indicative, final on quote
Texas Instruments RC4558PSR datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

RC4558PSR specifications
ParameterValue
Output typeDifferential
MountingSurface Mount
Amplifier typeGeneral Purpose
Voltage - input offset500 µV
Voltage - supply span30 V
Current - supply2.5mA (x2 Channels)
Current - input bias150 nA
Current - output (Channel)10 mA
Operating temperature0°C~70°C
Gain bandwidth product3 MHz
PackageTape & Reel (TR); Cut Tape (CT)
Slew rate1.7V/µs
Case8-SOIC (0.209\", 5.30mm Width)
Number of circuits2

Product details

The RC4558PSR is a dual-channel general-purpose operational amplifier from Texas Instruments, packing two independent op-amps into an 8-SOIC surface-mount package. It's the classic 4558 architecture — 3 MHz gain bandwidth and 1.7 V/µs slew rate — suited for audio preamplifiers, active filters, signal conditioning, and control loops where you don't need rail-to-rail output or precision below 500 µV offset.

Supply rails and temperature — where it lives on the board

Supply span runs from 10 V to 30 V, which means you can run it on ±5 V to ±15 V split supplies or a single 12 V or 24 V rail. Each channel draws 2.5 mA supply current, so the dual package pulls 5 mA total quiescent — reasonable for a general-purpose part but not a low-power choice for battery gear.

Frequently asked questions

Is RC4558PSR equivalent to LM358 or can it replace it?

Both are dual general-purpose op-amps in SOIC-8, but they are not drop-in equivalents without checking the circuit. The RC4558PSR has a 3 MHz GBW and 1.7 V/µs slew rate versus the LM358's 1 MHz and 0.3 V/µs — the 4558 is faster. Supply range on the RC4558PSR is 10 V to 30 V; the LM358 runs down to 3 V. Pinout is the same standard dual op-amp layout, but the compensation and bandwidth differences mean you should verify stability in your feedback loop before swapping.

Can RC4558PSR be used in audio circuits?

Yes, the 3 MHz gain bandwidth and 1.7 V/µs slew rate make it suitable for audio preamplifiers, active tone controls, and line-level signal conditioning. The 500 µV input offset voltage is adequate for non-critical audio paths; for DC-coupled precision audio you would want a lower-offset part like the OPA2134.

Is RC4558PSR compatible with standard 4558?

Yes, the RC4558PSR is a Texas Instruments version of the classic 4558 dual op-amp. Electrical characteristics — 3 MHz GBW, 1.7 V/µs slew rate, 10 V to 30 V supply — match the standard 4558 specification. The SOIC-8 package is the surface-mount variant of the traditional DIP-8 4558.