Texas Instruments RC4558P, dual general-purpose op-amp, 3 MHz gain bandwidth, 1.7 V/µs slew rate, 10-30 V supply, 8-DIP through-hole package.
| Parameter | Value |
|---|---|
| Output type | Differential |
| Mounting | Through Hole |
| Amplifier type | General Purpose |
| Voltage - input offset | 500 µV |
| Voltage - supply span | 30 V |
| Current - supply | 2.5mA (x2 Channels) |
| Current - input bias | 150 nA |
| Current - output (Channel) | 10 mA |
| Operating temperature | 0°C~70°C |
| Gain bandwidth product | 3 MHz |
| Package | Tube |
| Slew rate | 1.7V/µs |
| Case | 8-DIP (0.300\", 7.62mm) |
| Number of circuits | 2 |
The 3 MHz gain-bandwidth product sets the usable frequency for closed-loop gains.
The RC4558P is supplied in an 8-pin DIP package (0.300-inch body width, 7.62 mm pitch) and a through-hole mounting style. It is breadboard-friendly and easy to hand-solder, making it a common choice for prototyping, repair, and legacy board support. The supplier device package is 8-PDIP.
The TLV9362IDDFR is a surface-mount, rail-to-rail output dual op-amp with 10.6 MHz GBW and 25 V/µs slew rate, but it is not a pin-for-pin through-hole replacement. For a through-hole dual op-amp with similar supply range, consider the RC4558 family or the NE5532P; verify pin compatibility from the respective datasheets.