Texas Instruments RC4558IP dual general-purpose op-amp, 3 MHz gain-bandwidth, 1.7V/µs slew rate, 10-30V supply, 8-DIP through-hole package, tube.
| Parameter | Value |
|---|---|
| Output type | Differential |
| Mounting | Through Hole |
| Amplifier type | General Purpose |
| Voltage - input offset | 500 µV |
| Voltage - supply span | 30 V |
| Current - supply | 2.5mA (x2 Channels) |
| Current - input bias | 150 nA |
| Current - output (Channel) | 10 mA |
| Operating temperature | -40°C ~ 85°C |
| Gain bandwidth product | 3 MHz |
| Package | Tube |
| Slew rate | 1.7V/µs |
| Case | 8-DIP (0.300\", 7.62mm) |
| Number of circuits | 2 |
The Texas Instruments RC4558IP is a dual general-purpose operational amplifier in an 8-pin DIP through-hole package.
Operating from a single or split supply spanning 10 V to 30 V total, the RC4558IP fits into designs with standard ±5 V to ±15 V rails.
Input offset voltage is 500 µV typical, and input bias current is 150 nA — adequate for non-precision applications like summing amplifiers or comparator circuits where microvolt-level offset is not critical.
The LM6152ACMX/NOPB is a surface-mount dual op-amp with rail-to-rail output, 80 MHz GBW, and 30 V/µs slew rate — a much faster, wider-bandwidth part in an SOIC package. The RC4558IP is a through-hole DIP device with 3 MHz GBW and 1.7 V/µs slew rate, suited for lower-speed, through-hole designs. They are not pin-compatible; the LM6152 requires a board spin for surface-mount layout.