Texas Instruments RC4558DRG4 dual general-purpose operational amplifier, 3 MHz gain bandwidth product, 1.7 V/µs slew rate, 10 V to 30 V supply, 8-SOIC surface-mount package, 0°C to 70°C operating temperature.
| Parameter | Value |
|---|---|
| Output type | Differential |
| Mounting | Surface Mount |
| Amplifier type | General Purpose |
| Voltage - input offset | 500 µV |
| Voltage - supply span | 30 V |
| Current - supply | 2.5mA (x2 Channels) |
| Current - input bias | 150 nA |
| Current - output (Channel) | 10 mA |
| Operating temperature | 0°C~70°C |
| Gain bandwidth product | 3 MHz |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Slew rate | 1.7V/µs |
| Case | 8-SOIC (0.154\", 3.90mm Width) |
| Number of circuits | 2 |
Input offset voltage is 500 µV typical, input bias current is 150 nA. For a non-inverting gain-of-10 stage, the offset at the output is 5 mV — acceptable for audio line-level signals but worth budgeting in precision DC circuits. The differential output type suits balanced-line drivers and bridge-type sensor interfaces.
The RC4558DRG4 is the surface-mount 8-SOIC variant of the RC4558 family, while RC4558P is the through-hole DIP-8 version. Pin-compatible for the same circuit function, but the package footprint differs.
Yes. The 3 MHz gain-bandwidth product and 1.7 V/µs slew rate support audio-band signal conditioning up to 20 kHz with adequate loop gain for low-distortion active filters and pre-amplifier stages. The 500 µV input offset is typical for general-purpose audio, not ultra-low-noise designs.