Burr-Brown (TI) PGA202KP, Instrumentation Amplifier, 1 Circuit, 14-PDIP, 20V/µs Slew Rate, 1 MHz -3dB Bandwidth, 6.5mA Supply, ±12V to ±36V.
| Parameter | Value |
|---|---|
| Mounting | Through Hole |
| Amplifier type | Instrumentation |
| Voltage - input offset | 500 µV |
| Voltage - supply span | 36 V |
| Current - supply | 6.5mA |
| Current - input bias | 10 pA |
| Current - output (Channel) | 10 mA |
| Operating temperature | -25°C ~ 85°C |
| -3db bandwidth | 1 MHz |
| Package | Tube |
| Slew rate | 20V/µs |
| Case | 14-DIP (0.300\", 7.62mm) |
| Number of circuits | 1 |
Supply current is 6.5 mA. Input bias current is 10 pA, and input offset voltage is 500 µV. Output can source or sink 10 mA per channel.
The 14-DIP (0.300" width) is a rework-friendly package. Pin 1 is marked by a molded notch; a desoldering station or solder wick clears the holes cleanly. No thermal pad underneath, so no hidden solder joint to inspect.
The standard 14-DIP pinout follows the Burr-Brown instrumentation amplifier convention: non-inverting input on pin 3, inverting input on pin 2, output on pin 10, and supply pins 7 (V-) and 4 (V+). Pin 1 is identified by the package notch.