Texas Instruments e-trim™ OPA4205ADR, quad general-purpose op-amp, 3.6 MHz gain bandwidth, 4V/µs slew rate, rail-to-rail output, 4.5 V to 36 V supply, 14-SOIC.
| Parameter | Value |
|---|---|
| Series | e-trim™ |
| Output type | Push-Pull, Rail-to-Rail |
| Mounting | Surface Mount |
| Amplifier type | General Purpose |
| Voltage - input offset | 4 µV |
| Voltage - supply span | 4.5 V |
| Current - supply | 220µA |
| Current - input bias | 100 pA |
| Current - output (Channel) | 25 mA |
| Operating temperature | -40°C ~ 125°C (TA) |
| Gain bandwidth product | 3.6 MHz |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Slew rate | 4V/µs |
| Case | 14-SOIC (0.154\", 3.90mm Width) |
| Number of circuits | 4 |
It delivers a 3.6 MHz gain-bandwidth product and a 4V/µs slew rate, with a maximum input offset voltage of 4 µV and input bias current of 100 pA.
The e-trim™ series designation indicates on-chip trim calibration during manufacturing, which holds the offset voltage tight without external adjustment.
The OPA4205ADR is the Tape & Reel packaged variant of the OPA4205 device family. The 'R' suffix designates reel packaging; the electrical specifications are identical across the suffix options.
Yes. The OPA4205ADR operates from a single supply between 4.5 V and 36 V, and its rail-to-rail output stage swings to within millivolts of both supply rails, making it well suited for single-supply signal chains.
No. The OPA4205ADR is internally compensated for unity-gain stability. No external compensation components are needed for standard gain configurations.
The OPA4374AIPWT is a quad CMOS rail-to-rail op-amp in a similar 14-pin package, but with a higher 6.5 MHz GBW and 5 V/µs slew rate, and lower 0.5 pA input bias current. It operates from 2.7 V minimum supply, so it fits lower-voltage designs but does not match the 36 V supply range of the OPA4205ADR. The choice depends on whether you need the wider supply range (OPA4205ADR) or the lower voltage and lower bias (OPA4374).