800 nA supply — the battery-life differentiator
That figure places it squarely in the micropower class — the kind of part you pick for a sensor signal chain that stays on 24/7, or for a battery-powered monitor that needs years of life from a coin cell. The 12 kHz gain-bandwidth product and 0.005 V/µs slew rate confirm this is not a fast amplifier; it is designed for DC and low-frequency conditioning — thermocouple, strain gauge, photodiode, or battery-voltage monitoring.
Supply voltage range and temperature grade
Input offset voltage is 250 µV max, and input bias current is 10 pA, typical for a CMOS input stage.
Housed in a 5-lead SC-70-5 (also known as SOT-353), this part takes up minimal board area — about 2.0 mm × 2.1 mm. Surface-mount only.
If the exact code is tight on allocation, the TLV9351IDCKR is a functional alternative with a 3.5 MHz GBW and 20 V/µs slew rate, though its supply current is higher; verify the pin-compatible footprint before substituting.