Dual op-amp with 32 V/µs slew rate in an 8-SOIC
It delivers a 10.6 MHz gain-bandwidth product and a 32 V/µs slew rate, with rail-to-rail output swing that preserves dynamic range on low-voltage supplies. Each channel can source or sink 65 mA, enough to drive modest loads directly. The supply range spans 2.7 V to 40 V, so the same part can serve 3.3 V sensor interfaces and 24 V industrial analog stages.
The 2.7 V minimum supply lets it run from a single lithium cell or a 3.3 V rail with headroom; the 40 V maximum covers 24 V industrial buses with margin for transients. Quiescent current is 2.4 mA per amplifier, a reasonable draw for a 10 MHz-class part that doesn't compromise on speed.
Lifecycle and compliance
The ROHS3 compliance covers the current EU exemption regime, which simplifies export compliance for finished goods.
Sourcing and supply posture
For BOM resilience, the TLV9362IDDFR is a close parametric peer that could be qualified as a second source — same 10.6 MHz GBW, similar 25 V/µs slew rate, and the same 8-pin footprint.