Texas Instruments OPA277PA, General Purpose Amplifier, 1 Circuit, 8-DIP (0.300", 7.62mm), Through Hole, 1 MHz Gain Bandwidth, 0.8V/µs Slew Rate, 20 µV Input Offset, 4 V to 36 V Supply, -40°C to 85°C.
| Parameter | Value |
|---|---|
| Mounting | Through Hole |
| Amplifier type | General Purpose |
| Voltage - input offset | 20 µV |
| Voltage - supply span | 36 V |
| Current - supply | 790µA |
| Current - input bias | 500 pA |
| Current - output (Channel) | 35 mA |
| Operating temperature | -40°C ~ 85°C |
| Gain bandwidth product | 1 MHz |
| Package | Tube |
| Slew rate | 0.8V/µs |
| Case | 8-DIP (0.300\", 7.62mm) |
| Number of circuits | 1 |
The OPA277PA operates from a single supply as low as 4 V up to 36 V, or from dual ±2 V to ±18 V rails.
Supply current is 790 µA typical, keeping the power budget modest in multi-channel boards.
The part is ROHS3 compliant.
No discontinuation notice has been issued.
Yes, the OPA277PA is supplied in a tube. The package / case is an 8-DIP (0.300", 7.62mm) through-hole PDIP.
The TLV9351IDCKR is a surface-mount alternative with a 3.5 MHz GBW and 20 V/µs slew rate, but it is not pin-compatible due to the different package and footprint.