Texas Instruments OPA2703UA, dual CMOS rail-to-rail op-amp, 1 MHz gain bandwidth, 0.6 V/µs slew rate, 160 µA per channel, 8-SOIC package, industrial temperature range.
| Parameter | Value |
|---|---|
| Output type | Rail-to-Rail |
| Mounting | Surface Mount |
| Amplifier type | CMOS |
| Voltage - input offset | 160 µV |
| Voltage - supply span | 12 V |
| Current - supply | 160µA (x2 Channels) |
| Current - input bias | 1 pA |
| Current - output (Channel) | 10 mA |
| Operating temperature | -40°C ~ 85°C |
| Gain bandwidth product | 1 MHz |
| Package | Tube |
| Slew rate | 0.6V/µs |
| Case | 8-SOIC (0.154\", 3.90mm Width) |
| Number of circuits | 2 |
It delivers a gain-bandwidth product of 1 MHz and a slew rate of 0.6 V/µs, drawing just 160 µA per channel. The CMOS input stage keeps input bias current at 1 pA, making it a fit for high-impedance sensor conditioning, battery-monitoring circuits, and general-purpose signal chains in industrial control and instrumentation.
The part operates from a single supply spanning 4 V to 12 V. Each channel can source or sink 10 mA.
Yes, it contains two independent CMOS op-amp circuits in a single 8-SOIC package.
Rail-to-rail output, meaning the output voltage can swing within millivolts of both supply rails — useful for low-voltage single-supply designs.
The OPA4374AIPWT is a quad CMOS rail-to-rail op-amp with higher slew rate (5 V/µs) and bandwidth (6.5 MHz), wider temperature range (-40°C to 125°C), and a TSSOP-14 package. It is a functional upgrade but requires a different footprint and four channels.