Texas Instruments OPA2652U, SpeedPlus™ series, dual voltage feedback operational amplifier, 700 MHz -3 dB bandwidth, 335 V/µs slew rate, 200 MHz GBP, 11 mA per channel supply, 8-SOIC package, -40°C to 85°C.
| Parameter | Value |
|---|---|
| Series | SpeedPlus™ |
| Mounting | Surface Mount |
| Amplifier type | Voltage Feedback |
| Voltage - input offset | 1.5 mV |
| Voltage - supply span | 12 V |
| Current - supply | 11mA (x2 Channels) |
| Current - input bias | 4 µA |
| Current - output (Channel) | 140 mA |
| Operating temperature | -40°C ~ 85°C |
| -3db bandwidth | 700 MHz |
| Gain bandwidth product | 200 MHz |
| Package | Tube |
| Slew rate | 335V/µs |
| Case | 8-SOIC (0.154\", 3.90mm Width) |
| Number of circuits | 2 |
No NRND or EOL notice is on file. For BOM freeze or second-source planning, the THS4215DRBT is a functional cross-reference if a single-channel 5 V supply works; otherwise, no pin-compatible dual drop-in exists in the same SpeedPlus family.
Surface-mount 8-SOIC (0.154" body width, 3.90 mm). The tube shipment is fine for hand assembly or small reels; if you need tape-and-reel for automated pick-and-place, verify the reel option with your supplier before ordering.
The THS4215DRBT is a single-channel voltage-feedback amplifier with 350 MHz bandwidth and 970 V/µs slew rate, but it runs on 5 V only and comes in a QFN package. It is not a pin-compatible drop-in; evaluate it if a single channel and 5 V rail work for your application.
The 12 V maximum supply span limits headroom for higher-voltage rails. The 4 µA input bias current is higher than JFET-input op-amps, so it is less suited for high-impedance sensor interfaces. Slew rate of 335 V/µs limits large-signal bandwidth above roughly 50 MHz for 2 Vpp swings.