Texas Instruments OPA2363AIDGST, dual CMOS rail-to-rail op-amp in 10-VSSOP, 7 MHz GBW, 5V/µs slew rate, 1.1 mA supply, -40°C to 125°C.
| Parameter | Value |
|---|---|
| Output type | Rail-to-Rail |
| Mounting | Surface Mount |
| Amplifier type | CMOS |
| Voltage - input offset | 1 mV |
| Voltage - supply span | 5.5 V |
| Current - supply | 1.1mA (x2 Channels) |
| Current - input bias | 1 pA |
| Current - output (Channel) | 85 mA |
| Operating temperature | -40°C ~ 125°C |
| Gain bandwidth product | 7 MHz |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Slew rate | 5V/µs |
| Case | 10-TFSOP, 10-MSOP (0.118\", 3.00mm Width) |
| Number of circuits | 2 |
The 1 pA input bias current and 1 mV input offset voltage suit precision conditioning of high-impedance sensors. The part is packaged in a 10-VSSOP (MSOP-10) footprint, surface-mount only.
The 1.8 V minimum supply allows direct operation from a single Li-ion cell or a 1.8 V digital rail, while the 5.5 V max covers 5 V legacy systems. No second supply needed; the CMOS rail-to-rail output swings within millivolts of both rails.
Submit an RFQ to confirm availability and current pricing for your quantity — quotes are issued against your specific line-item request, not a published stock figure.
Yes. The 1.1 mA total supply current (both channels) and 1.8 V minimum supply make it a strong fit for battery-operated sensor conditioning. The 1 pA input bias preserves accuracy from high-impedance sources like photodiodes or pH probes, and the rail-to-rail output maximizes dynamic range on a single low-voltage rail.
Both share the same die and electrical specs. Electrically and footprint-wise they are identical — the choice is logistics (reel vs tube) for your pick-and-place line.