At the other end, the 5.5 V maximum covers standard 5 V logic and sensor rails without needing a regulator.
Rail-to-rail output and CMOS inputs
Rail-to-rail output swing maximises dynamic range in low-voltage single-supply chains — the output can swing within millivolts of each rail, which matters when the ADC reference is the supply itself. The CMOS input stage keeps bias current at 1 pA, so high-impedance sources like photodiodes, pH probes, or precision resistor dividers see negligible loading error.
Housed in a 10-VSSOP (MSOP-10) package with 0.118-inch body width. The 10-pin footprint is shared with several other dual op-amps in the TI portfolio, easing board layout if a second-source or alternate is needed later. MSL level is typical for this package family — verify the moisture sensitivity label on the reel.