Texas Instruments microPOWER™ series OPA2340PA, dual CMOS rail-to-rail op-amp, 5.5 MHz gain bandwidth, 6 V/µs slew rate, 750 µA supply per channel, 8-PDIP through-hole package.
| Parameter | Value |
|---|---|
| Series | microPOWER™ |
| Output type | Rail-to-Rail |
| Mounting | Through Hole |
| Amplifier type | CMOS |
| Voltage - input offset | 150 µV |
| Voltage - supply span | 5.5 V |
| Current - supply | 750µA (x2 Channels) |
| Current - input bias | 0.2 pA |
| Current - output (Channel) | 50 mA |
| Operating temperature | -40°C~85°C |
| Gain bandwidth product | 5.5 MHz |
| Package | Tube |
| Slew rate | 6V/µs |
| Case | 8-DIP (0.300\", 7.62mm) |
| Number of circuits | 2 |
The OPA2340PA is a dual CMOS operational amplifier from the microPOWER™ series. Supply current is 750 µA per amplifier. The rail-to-rail output stage maximizes dynamic range at low supply voltages.
Housed in an 8-pin PDIP (0.300-inch width, 7.62 mm pitch), the through-hole package is breadboard-friendly and survives rework cycles well — a practical choice for prototyping, repair, or legacy board maintenance.
Buyers need to know if the part is end-of-life to plan for last-time buys or find a replacement.
Design engineers and procurement can avoid redesigns by choosing a drop-in substitute.
Engineers need the official datasheet for pinout, electrical specs, and layout guidance.
Sourcing buyers need trusted distributors to check stock and pricing.
Price is a key factor for BOM cost estimation and negotiation.
Lead time and availability directly impact production schedules and sourcing decisions.