Texas Instruments NE5534DRE4, general-purpose op amp, single channel, 10 MHz gain bandwidth, 13 V/µs slew rate, 8-SOIC surface mount, 0°C to 70°C, Tape & Reel.
| Parameter | Value |
|---|---|
| Mounting | Surface Mount |
| Amplifier type | General Purpose |
| Voltage - input offset | 500 µV |
| Voltage - supply span | 30 V |
| Current - supply | 4mA |
| Current - input bias | 500 nA |
| Current - output (Channel) | 38 mA |
| Operating temperature | 0°C~70°C |
| Gain bandwidth product | 10 MHz |
| Package | Tape & Reel (TR) |
| Slew rate | 13V/µs |
| Case | 8-SOIC (0.154\", 3.90mm Width) |
| Number of circuits | 1 |
It runs on a supply span from 10 V to 30 V, which covers both split ±5 V to ±15 V rails and single 12 V or 24 V industrial supplies — a flexible fit for existing board designs without re-spinning the power section.
For outdoor or under-hood environments you would reach for the industrial-temperature (-40°C to 85°C) sibling in the same family.
It ships in Tape & Reel, ready for pick-and-place volume assembly.
No — the NE5534DRE4 is a single-channel op amp. The dual version is the NE5532 family, which shares the same 10 MHz GBW and 13 V/µs slew rate but packs two amplifiers in one package.