Skip to main content
Log in
Texas Instruments NE5532PE4 — Analog & Data Acquisition

TI NE5532PE4 Dual Op-Amp, 10 MHz GBW, 9V/µs Slew Rate

MPNNE5532PE4
End of Life

Texas Instruments NE5532PE4 dual general-purpose op-amp, 10 MHz gain-bandwidth product, 9V/µs slew rate, 8 mA supply per channel, 8-PDIP through-hole package, 0°C to 70°C operating temperature.

$0.4300Ref. price · indicative, final on quote
Texas Instruments NE5532PE4 datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

NE5532PE4 specifications
ParameterValue
MountingThrough Hole
Amplifier typeGeneral Purpose
Voltage - input offset500 µV
Voltage - supply span30 V
Current - supply8mA (x2 Channels)
Current - input bias200 nA
Current - output (Channel)38 mA
Operating temperature0°C~70°C(TA)
Gain bandwidth product10 MHz
PackageTube
Slew rate9V/µs
Case8-DIP (0.300\", 7.62mm)
Number of circuits2

Product details

9V/µs slew rate — what it buys the audio chain

The NE5532PE4 is a dual general-purpose op-amp from Texas Instruments. Its 9V/µs slew rate and 10 MHz gain-bandwidth product make it a staple for line-level audio stages — preamp, active filter, and headphone driver circuits — where the dynamic range stays within the ±15 V supply rails and the signal bandwidth fits under 100 kHz.

Supply span and output drive

The 8-PDIP package (0.300-inch wide) fits standard DIP sockets and breadboards, making it a common choice for prototyping and low-volume production runs.

Listed as Active on the Texas Instruments product status.

Frequently asked questions

What is the difference between NE5532PE4 and NE5532P?

The NE5532PE4 is the lead-free (RoHS) version of the NE5532P. Electrical specs — 10 MHz GBW, 9V/µs slew rate, 8 mA supply per channel — are identical. The package and pinout are the same 8-PDIP. The '' suffix denotes TI's green/RoHS-compliant finish.

Can NE5532PE4 be used in audio applications?

Yes. The 38 mA output per channel can drive 600 Ω loads directly.