Skip to main content
Log in
NE5532DRE4

Texas Instruments NE5532DRE4 Dual Op-Amp, 10 MHz, 9 V/µs

MPNNE5532DRE4
End of Life

Texas Instruments NE5532DRE4, dual general-purpose operational amplifier, 10 MHz gain bandwidth product, 9 V/µs slew rate, 8-SOIC surface-mount package, 0°C to 70°C operating temperature.

Texas Instruments NE5532DRE4 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

NE5532DRE4 specifications
ParameterValue
MountingSurface Mount
Amplifier typeGeneral Purpose
Voltage - input offset500 µV
Voltage - supply span30 V
Current - supply8mA (x2 Channels)
Current - input bias200 nA
Current - output (Channel)38 mA
Operating temperature0°C~70°C(TA)
Gain bandwidth product10 MHz
PackageTape & Reel (TR)
Slew rate9V/µs
Case8-SOIC (0.154\", 3.90mm Width)
Number of circuits2

Product details

Dual op-amp for audio and signal conditioning

The amplifier operates from a split supply spanning ±5 V to ±15 V (10 V to 30 V total) and sinks or sources 38 mA per channel. Quiescent current is 8 mA per channel, so a dual-supply rail at ±15 V draws about 16 mA total with no load.

DC precision and input characteristics

These figures are adequate for audio line-level signals and many control-loop applications, though a precision op-amp with lower offset and bias would be needed for microvolt-level sensor conditioning.

Frequently asked questions

Is NE5532DRE4 suitable for audio amplifier circuits?

Yes. With a 10 MHz gain-bandwidth product and 9 V/µs slew rate, the NE5532DRE4 is well-suited for audio preamplifiers, active crossovers, and line drivers in commercial-temperature (0°C to 70°C) equipment.

Can NE5532 replace LM358?

The NE5532 is not a direct pin-compatible replacement for the LM358. While both are dual op-amps in an 8-pin SOIC, the NE5532 has a significantly higher bandwidth (10 MHz vs 1 MHz) and slew rate (9 V/µs vs 0.3 V/µs), and its supply range and output drive differ. Check the pinout and compensation before substituting.