Texas Instruments NE5532DR, dual general-purpose op-amp, 10 MHz gain bandwidth, 9V/µs slew rate, 8 mA supply, 8-SOIC surface-mount package, 0°C to 70°C operating range.
| Parameter | Value |
|---|---|
| Mounting | Surface Mount |
| Amplifier type | General Purpose |
| Voltage - input offset | 500 µV |
| Voltage - supply span | 30 V |
| Current - supply | 8mA (x2 Channels) |
| Current - input bias | 200 nA |
| Current - output (Channel) | 38 mA |
| Operating temperature | 0°C~70°C(TA) |
| Gain bandwidth product | 10 MHz |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Slew rate | 9V/µs |
| Case | 8-SOIC (0.154\", 3.90mm Width) |
| Number of circuits | 2 |
The Texas Instruments NE5532DR is a dual-channel, general-purpose operational amplifier in an 8-SOIC package.
The 10 MHz gain-bandwidth product and 9V/µs slew rate support audio-band signal reproduction. The 38 mA output current per channel can drive headphones or a following stage input directly. This rules out automotive, outdoor telecom, or industrial floor applications where ambient may exceed 70°C.
The TLV9362IDDFR is a dual general-purpose op-amp with a 10.6 MHz GBP and 25 V/µs slew rate, but it operates from a 4.5 V single supply and offers rail-to-rail output, unlike the NE5532DR's ±5 V to ±15 V dual-supply range. It is not a pin-compatible second source without board-level supply and output swing changes.
The NE5532 is the base device number; the 'DR' suffix specifies the 8-SOIC package supplied in Tape & Reel or Cut Tape form. The die and electrical specifications are identical.