Skip to main content
Log in
Texas Instruments MSP430P325AIFN — Microcontrollers & Processors (MCU / MPU / DSP)

Texas Instruments MSP430P325AIFN 16-bit MCU, 8MHz, 16KB OTP, 68-PLCC

MPNMSP430P325AIFN
Obsolete

Texas Instruments MSP430P325AIFN, MSP430x3xx series, 16-bit MSP430 CPU16 core at 8MHz, 16KB OTP program memory, 512×8 RAM, 6×14-bit A/D, LCD/WDT/POR peripherals, UART/USART, 14 I/O, 2.5–5.5V supply, -40 to 85°C, 68-PLCC (24.23×24.23mm) J-lead package, surface mount, tube.

Texas Instruments MSP430P325AIFN datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

MSP430P325AIFN specifications
ParameterValue
SeriesMSP430x3xx
MountingSurface Mount
Oscillator typeInternal
Program memory typeOTP
Voltage - supply (Vcc (Vdd))2.5V ~ 5.5V
Operating temperature-40°C~85°C(TA)
Speed8MHz
PackageTube
RAM size512 x 8
Core size16-Bit
PeripheralsLCD, POR, WDT
ConnectivityUART/USART
Number of i (O)14
Core processorMSP430 CPU16
Case68-LCC (J-Lead)
Data convertersA/D 6x14b
Program memory size16KB (16K x 8)

Product details

OTP memory locks the firmware — no field updates

The Texas Instruments MSP430P325AIFN is a 16-bit MSP430 CPU16 microcontroller from the MSP430x3xx series, clocked at 8 MHz with 16 KB of OTP program memory and 512×8 bytes of RAM. The OTP (one-time programmable) memory means the firmware is fixed at the factory — there is no erasing or reprogramming after the device is programmed. This suits applications where the code is finalized before production and field updates are not required, such as in sealed metering modules or dedicated display controllers.

On-chip peripherals reduce external component count

Integrates a 6-channel 14-bit ADC, LCD driver, POR, WDT, and UART/USART. Supply range is 2.5 V to 5.5 V, operating from -40°C to 85°C.

Obsolete — sourced through surplus channels

Frequently asked questions

What is the pinout of MSP430P325AIFN?

The MSP430P325AIFN is in a 68-PLCC package with J-leads. The standard PLCC pinout applies; pin 1 is marked at the corner. Refer to the Texas Instruments datasheet for the full pin assignment.

Can MSP430P325AIFN be programmed with MSP-FET?

The MSP430P325AIFN uses OTP memory and is programmed once at the factory or with a compatible programmer before assembly. The MSP-FET debugger can program OTP MSP430 devices via JTAG/SBW, but the code cannot be erased or updated afterward.