Texas Instruments MSP430G2403IPW28, 16-bit MSP430 CPU16, 16 MHz, 8 KB Flash, 512 B RAM, 24 I/O, I²C/SPI/UART/LINbus, 1.8V-3.6V, -40 to 85°C, 28-TSSOP.
| Parameter | Value |
|---|---|
| Series | MSP430G2xx |
| Mounting | Surface Mount |
| Oscillator type | Internal |
| Program memory type | FLASH |
| Voltage - supply (Vcc (Vdd)) | 1.8V ~ 3.6V |
| Operating temperature | -40°C~85°C(TA) |
| Speed | 16MHz |
| Package | Tube |
| RAM size | 512 x 8 |
| Core size | 16-Bit |
| Peripherals | Brown-out Detect/Reset, PWM, WDT |
| Connectivity | I²C, IrDA, LINbus, SCI, SPI, UART/USART |
| Number of i (O) | 24 |
| Core processor | MSP430 CPU16 |
| Case | 28-TSSOP (0.173\", 4.40mm Width) |
| Program memory size | 8KB (8K x 8) |
Brown-out detect and reset (BOR) protects against supply glitches; a watchdog timer guards against firmware hangs. The PWM output is available on timer channels for dimming LEDs or driving small DC loads. 24 I/O pins in a 28-TSSOP package leave enough headroom for a keypad matrix and a few status LEDs alongside the serial bus.
Product status is active — no last-time-buy notice.
The CPU runs at 16 MHz, which sets the instruction cycle time and peripheral clock base.
Within the MSP430G2xx series, parts with the same 28-TSSOP package and pinout — such as the MSP430G2233 (2 KB Flash / 256 B RAM) or MSP430G2452 (8 KB Flash / 512 B RAM) — are footprint-compatible, but verify memory and peripheral differences against the BOM.