Skip to main content
Log in
Texas Instruments MSP430G2001IPW4Q1 — Microcontrollers & Processors (MCU / MPU / DSP)

MSP430G2001IPW4Q1 TI MCU 16-bit 16MHz 512B Flash 14-TSSOP

MPNMSP430G2001IPW4Q1
End of Life

Texas Instruments MSP430G2001IPW4Q1, Automotive AEC-Q100, MSP430G2, 16-Bit MCU, 16MHz, 512B (512 x 8) FLASH, 128 x 8 RAM, 10 I/O, 14-TSSOP, -40°C~85°C.

Texas Instruments MSP430G2001IPW4Q1 datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

MSP430G2001IPW4Q1 specifications
ParameterValue
SeriesAutomotive, AEC-Q100, MSP430G2
MountingSurface Mount
Oscillator typeInternal
Program memory typeFLASH
Voltage - supply (Vcc (Vdd))1.8V ~ 3.6V
Operating temperature-40°C~85°C(TA)
Speed16MHz
PackageTube
RAM size128 x 8
Core size16-Bit
PeripheralsBrown-out Detect/Reset, POR, PWM, WDT
Number of i (O)10
Core processorMSP430 CPU16
Case14-TSSOP (0.173\", 4.40mm Width)
Program memory size512B (512 x 8)

Product details

AEC-Q100 qualified 16-bit MCU for automotive and industrial control

It runs the MSP430 CPU16 core at up to 16 MHz, with 512 bytes of Flash program memory and 128 bytes of RAM. The device integrates a brown-out detect/reset, POR, PWM, and watchdog timer, and provides 10 general-purpose I/O lines. This part is intended for cost-sensitive automotive body electronics, sensor interfaces, and low-power control modules where the AEC-Q100 qualification is a BOM requirement.

512 bytes of Flash and 128 bytes of RAM — sizing the firmware budget

With 512 bytes of Flash (512 x 8) and 128 bytes of RAM (128 x 8), this MCU targets single-function control loops and state machines — think a window-lift controller, a seat-position sensor, or a simple PWM fan driver. The Flash is field-reprogrammable, but the firmware image must fit within that half-kilobyte boundary. The 128-byte SRAM limits stack depth and data buffers; a design that needs more than a few bytes of working memory should step up to a higher-density MSP430G2 variant.

Frequently asked questions

Is MSP430G2001IPW4Q1 automotive qualified?

Yes, the MSP430G2001IPW4Q1 is part of the Automotive, AEC-Q100, MSP430G2 series, meaning it is qualified to the AEC-Q100 stress test standard for automotive-grade integrated circuits.

What is the difference between MSP430G2001IPW4Q1 and MSP430G2001IPW4?

The key difference is the AEC-Q100 automotive qualification. The MSP430G2001IPW4Q1 carries the 'Q1' suffix, which designates it as an automotive-grade part qualified to AEC-Q100. The non-Q1 variant (MSP430G2001IPW4) is the commercial/industrial grade version without that qualification. Both share the same 16-bit MSP430 CPU16 core, 16 MHz speed, 512-byte Flash, 128-byte RAM, and 14-TSSOP package. For automotive BOM lines, the Q1 suffix is the one to specify.