Skip to main content
Texas Instruments MSP430FR5724IRGET — Microcontrollers & Processors (MCU / MPU / DSP)

TI MSP430FR5724IRGET 16-bit MCU, 8KB FRAM, 8MHz, 24-VQFN

MPNMSP430FR5724IRGET
Active

Texas Instruments MSP430™ FRAM series, MSP430FR5724IRGET, 16-bit MCU with MSP430 CPUXV2 core, 8MHz speed, 8KB (8K x 8) FRAM program memory, 1K x 8 RAM, 17 I/O, I²C/SPI/UART connectivity, 24-VFQFN Exposed Pad package, -40°C to 85°C operating temperature.

$4.0300Ref. price · indicative, final on quote
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

MSP430FR5724IRGET Technical Specifications
ParameterValue
SeriesMSP430™ FRAM
Mounting typeSurface Mount
Oscillator typeInternal
Program memory typeFRAM
Voltage - supply (Vcc (Vdd))2V ~ 3.6V
Operating temperature-40°C~85°C(TA)
Speed8MHz
PackageTape & Reel (TR); Cut Tape (CT)
RAM size1K x 8
Core size16-Bit
PeripheralsBrown-out Detect/Reset, POR, PWM, WDT
ConnectivityI²C, IrDA, LINbus, SCI, SPI, UART/USART
Number of i (O)17
Core processorMSP430 CPUXV2
Case24-VFQFN Exposed Pad
Data convertersA/D 8x10b
Program memory size8KB (8K x 8)

Product details

FRAM memory — the real differentiator

Its headline feature is 8 KB of FRAM program memory, a non-volatile storage technology that writes at bus speed with essentially unlimited endurance — orders of magnitude more write cycles than Flash, at a fraction of the write energy. The 8 MHz CPUXV2 core, 1K x 8 RAM, and 17 I/O lines package the essentials for a compact control loop, with I²C, SPI, and UART connectivity for sensor or display interfaces.

Package and rework consideration

The 24-VFQFN Exposed Pad package (4x4 mm, 0.5 mm pitch) is a hand-reworkable QFN if you have a hot-air station and a fine tip. The exposed thermal pad needs a via stitch to the ground plane for heat sinking; without it, continuous operation above 85°C ambient will push the junction.

Frequently asked questions

Can MSP430FR5724IRGET be used with an external oscillator?

Yes — the device includes an internal oscillator, but the connectivity block supports external clock sources through the SCI interface. The internal oscillator is sufficient for most low-speed control applications.

How to program MSP430FR5724IRGET?

The MSP430FR5724IRGET is programmed via the Spy-Bi-Wire (SBW) two-wire JTAG interface, which is standard on all MSP430 devices. TI's Code Composer Studio or IAR Embedded Workbench can be used with a compatible debug probe (e.g., MSP-FET or LaunchPad).