Skip to main content
Log in
MSP430FR2033IG56

TI MSP430FR2033IG56 16-bit MCU, 16 MHz, 15.5 KB FRAM

MPNMSP430FR2033IG56
Active

Texas Instruments MSP430FR2033IG56, MSP430™ FRAM series, 16-bit MCU, 16 MHz, 15.5 KB FRAM, 2K x 8 SRAM, 52 I/O, 8x10-bit ADC, I²C/SPI/UART, 1.8V–3.6V, -40°C–85°C, 56-TSSOP.

$3.4200Ref. price · indicative, final on quote
Texas Instruments MSP430FR2033IG56 datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

MSP430FR2033IG56 specifications
ParameterValue
SeriesMSP430™ FRAM
MountingSurface Mount
Oscillator typeInternal
Program memory typeFRAM
Voltage - supply (Vcc (Vdd))1.8V ~ 3.6V
Operating temperature-40°C~85°C(TA)
Speed16MHz
PackageTube
RAM size2K x 8
Core size16-Bit
PeripheralsBrown-out Detect/Reset, POR, PWM, WDT
ConnectivityI²C, IrDA, SCI, SPI, UART/USART
Number of i (O)52
Core processorMSP430 CPU16
Case56-TFSOP (0.240\", 6.10mm Width)
Data convertersA/D 8x10b
Program memory size15.5KB (15.5K x 8)

Product details

FRAM-based MSP430 — what sets this MCU apart

Its program memory is 15.5 KB of FRAM — a non-volatile memory that combines the write speed and endurance of SRAM with the retention of Flash, eliminating the need for separate EEPROM and simplifying field-update firmware strategies.

The 16 MHz clock rate on a 16-bit RISC core is enough for sensor polling, PID loops, and communication protocol handling in most embedded control applications. If you are coming from an MSP430F series part, the CPU16 core is instruction-set compatible, so existing assembly or C code ports with minimal changes.

Supply rail and temperature — design-in notes

Frequently asked questions

Can MSP430FR2033IG56 be programmed with standard MSP430 tools?

Yes, it uses the standard MSP430 JTAG/SBW (Spy-Bi-Wire) interface supported by TI's Code Composer Studio, IAR Embedded Workbench, and common third-party programmers. The CPU16 core is instruction-set compatible with the broader MSP430 family.

Is MSP430FR2033IG56 compatible with MSP430F series parts?

The CPU16 core is architecturally compatible with the MSP430F series, so C and assembly code ports are straightforward. However, the FRAM memory model differs from Flash — firmware that relies on Flash write timing or sector-erase granularity may need adjustment for the FRAM's byte-addressable, higher-endurance write behavior.