20 MHz clock on the 16-bit RISC core. Enough for a PID loop at a few kHz or USB polling at full-speed.
Memory and peripheral fit
192 KB Flash and 18 KB RAM. 16-channel 12-bit ADC. Brown-out detect and POR on-chip.

Texas Instruments MSP430F5xx series 16-bit MCU, MSP430F5634IPZR, MSP430 CPUXV2 core, 20MHz, 192KB Flash, 18K x 8 RAM, USB/I²C/SPI/UART, 74 I/O, 16-ch 12-bit ADC, 1.8V–3.6V, -40°C to 85°C, 100-LQFP.
| Parameter | Value |
|---|---|
| Series | MSP430F5xx |
| Mounting | Surface Mount |
| Oscillator type | Internal |
| Program memory type | FLASH |
| Voltage - supply (Vcc (Vdd)) | 1.8V ~ 3.6V |
| Operating temperature | -40°C~85°C(TA) |
| Speed | 20MHz |
| Package | Tape & Reel (TR) |
| RAM size | 18K x 8 |
| Core size | 16-Bit |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Connectivity | I²C, IrDA, LINbus, SCI, SPI, UART/USART, USB |
| Number of i (O) | 74 |
| Core processor | MSP430 CPUXV2 |
| Case | 100-LQFP |
| Data converters | A/D 16x12b |
| Program memory size | 192KB (192K x 8) |
20 MHz clock on the 16-bit RISC core. Enough for a PID loop at a few kHz or USB polling at full-speed.
192 KB Flash and 18 KB RAM. 16-channel 12-bit ADC. Brown-out detect and POR on-chip.
The MSP430F5635 (256 KB Flash) is a pin-compatible upgrade in the same 100-LQFP package and MSP430F5xx family. Verify firmware memory map and USB descriptor size before swapping; the core, peripherals, and pinout match.
The MSP430F5634IPZR runs at 20 MHz on the MSP430 CPUXV2 core.
It belongs to the MSP430F5xx series of ultra-low-power 16-bit MCUs from Texas Instruments.