Texas Instruments MSP430F5xx series 16-bit MCU, MSP430F5234IRGZT, CPUXV2 core 25 MHz, 128 KB Flash, 8 KB RAM, I²C/SPI/UART, 37 I/O, 48-VFQFN exposed pad, -40°C to 85°C.
| Parameter | Value |
|---|---|
| Series | MSP430F5xx |
| Mounting | Surface Mount |
| Oscillator type | Internal |
| Program memory type | FLASH |
| Voltage - supply (Vcc (Vdd)) | 1.8V ~ 3.6V |
| Operating temperature | -40°C~85°C(TA) |
| Speed | 25MHz |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| RAM size | 8K x 8 |
| Core size | 16-Bit |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Connectivity | I²C, IrDA, SPI, UART/USART |
| Number of i (O) | 37 |
| Core processor | MSP430 CPUXV2 |
| Case | 48-VFQFN Exposed Pad |
| Program memory size | 128KB (128K x 8) |
On the connectivity side, this MCU brings I²C, IrDA, SPI, and UART/USART — all available simultaneously through the shared pin mux. That means a design can run a sensor over I²C, talk to a radio over SPI, and keep a debug UART active without swapping peripherals. The internal oscillator cuts the external BOM to a single decoupling cap if the accuracy budget allows.
Yes, the device includes I²C, SPI, and UART/USART peripherals that can operate simultaneously through the shared pin mux.
The part comes in a 48-VFQFN exposed pad package (48-VQFN 7x7 mm). The pinout is defined in the TI datasheet; the 37 I/O lines are muxed with the serial and timer peripherals.