Skip to main content
Log in
Texas Instruments MSP430F417IPM — Microcontrollers & Processors (MCU / MPU / DSP)

MSP430F417IPM 16-bit MCU, 8 MHz, 32 KB Flash, 64-LQFP

MPNMSP430F417IPM
Active

Texas Instruments MSP430x4xx series MSP430F417IPM, 16-bit MSP430 CPU16 MCU, 8 MHz, 32KB (32K x 8 + 256B) FLASH, 1K x 8 RAM, 48 I/O, Slope A/D, internal oscillator, 1.8V~3.6V supply, -40°C~85°C, 64-LQFP (10x10), tray.

$8.3800Ref. price · indicative, final on quote
Texas Instruments MSP430F417IPM datasheet (PDF)
Packaging64-LQFP
RoHSROHS3 Compliant
SeriesMSP430x4xx
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

MSP430F417IPM specifications
ParameterValue
SeriesMSP430x4xx
MountingSurface Mount
Oscillator typeInternal
Program memory typeFLASH
Voltage - supply (Vcc (Vdd))1.8V ~ 3.6V
Operating temperature-40°C~85°C(TA)
Speed8MHz
PackageTray
RAM size1K x 8
Core size16-Bit
PeripheralsBrown-out Detect/Reset, LCD, POR, PWM, WDT
Number of i (O)48
Core processorMSP430 CPU16
Case64-LQFP
Data convertersSlope A/D
Program memory size32KB (32K x 8 + 256B)

Product details

8 MHz ultra-low-power 16-bit MCU with integrated LCD drive

The standout feature is the integrated LCD driver peripheral, which directly drives segmented LCD panels without an external controller — a key differentiator for battery-powered metering and instrumentation designs.

The 1.8 V minimum is particularly useful for energy-harvesting or coin-cell applications where rail droop under load must be tolerated.

Peripheral set for instrumentation and control

Beyond the LCD driver, the peripheral list includes a brown-out detect and reset circuit, power-on reset, PWM channels, and a watchdog timer. The slope A/D converter provides a low-cost analog measurement path without an external ADC. The 48 I/O lines give ample headroom for parallel LCD segment mapping, keypad scanning, and sensor interrupt lines in a single-chip architecture.

Housed in a 64-LQFP (10x10 mm) surface-mount package, the MSP430F417IPM uses a standard 0.5 mm pitch QFP footprint. The supplier device package is 64-LQFP (10x10), which is a common form factor for mid-density MCUs and fits well on two-layer boards without micro-vias.

Frequently asked questions

Does MSP430F417IPM require an external oscillator?

No, the MSP430F417IPM includes an internal oscillator, so an external crystal or clock source is not mandatory for basic operation. For applications requiring precise timing (e.g., RTC or high-accuracy baud rates), an external crystal can still be connected to the dedicated oscillator pins.

Is MSP430F417IPM compatible with 3.3V logic?

All I/O pins are 3.3 V tolerant when Vcc is at 3.3 V, making it compatible with common 3.3 V peripherals and logic families without level shifters.

What is the difference between MSP430F417IPM and MSP430F417IRPM?

The two order codes differ in packaging and temperature grade. The MSP430F417IRPM variant typically uses a different package or reel format; verify the exact suffix against the TI ordering guide for your assembly process and temperature requirements.