Texas Instruments MSP430F2xx series 16-bit MCU, MSP430 CPU16 core, 16MHz, 92KB Flash, 4K x 8 RAM, 48 I/O, I²C/SPI/UART, 8x12b ADC + 2x12b DAC, -40°C~105°C, 64-LQFP.
| Parameter | Value |
|---|---|
| Series | MSP430F2xx |
| Mounting | Surface Mount |
| Oscillator type | Internal |
| Program memory type | FLASH |
| Voltage - supply (Vcc (Vdd)) | 1.8V ~ 3.6V |
| Operating temperature | -40°C~105°C(TA) |
| Speed | 16MHz |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| RAM size | 4K x 8 |
| Core size | 16-Bit |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Connectivity | I²C, IrDA, LINbus, SCI, SPI, UART/USART |
| Number of i (O) | 48 |
| Core processor | MSP430 CPU16 |
| Case | 64-LQFP |
| Data converters | A/D 8x12b; D/A 2x12b |
| Program memory size | 92KB (92K x 8 + 256B) |
The MSP430F2616TPMR: It integrates an 8-channel 12-bit ADC and a dual 12-bit DAC, plus I²C, SPI, UART, IrDA, and LINbus interfaces.
The 64-LQFP (10x10 mm body) is a common fine-pitch QFP with 0.5 mm lead pitch. It is a hand-solderable package for prototyping and rework-capable for production reflow. The exposed pad is not present on this package variant, so thermal dissipation relies on the leadframe and copper pours on the top layer.
Yes. The MSP430F2616TPMR uses the standard MSP430 JTAG and Spy-Bi-Wire (SBW) programming interfaces. Any TI or third-party MSP430 programmer (e.g., MSP-FET, MSP430 LaunchPad) can program the device through the 4-wire JTAG or 2-wire SBW protocol.
Both share the same 16-bit MSP430 CPU16 core, 16 MHz speed, 48 I/O, 64-LQFP package, and peripheral set including ADC and DAC. The pinout is identical, so a firmware-only migration is possible if the extra memory is needed.