Texas Instruments MSP430F2xx series MSP430F2131TRGER, 16-bit MSP430 CPU16, 16 MHz, 8 KB Flash, 256 x 8 RAM, 16 I/O, 1.8 V to 3.6 V, -40°C to 105°C, 24-VFQFN exposed pad.
| Parameter | Value |
|---|---|
| Series | MSP430F2xx |
| Mounting | Surface Mount |
| Oscillator type | Internal |
| Program memory type | FLASH |
| Voltage - supply (Vcc (Vdd)) | 1.8V ~ 3.6V |
| Operating temperature | -40°C~105°C(TA) |
| Speed | 16MHz |
| Package | Tape & Reel (TR) |
| RAM size | 256 x 8 |
| Core size | 16-Bit |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Number of i (O) | 16 |
| Core processor | MSP430 CPU16 |
| Case | 24-VFQFN Exposed Pad |
| Data converters | Slope A/D |
| Program memory size | 8KB (8K x 8 + 256B) |
It carries 8 KB of Flash program memory (8K x 8 plus 256 B) and 256 bytes of RAM (256 x 8), with 16 general-purpose I/O lines.
The 24-VFQFN package with exposed pad (24-VQFN, 4x4 mm) keeps the footprint small while the pad helps pull heat into the PCB ground plane — useful if the MCU is running peripherals continuously at the upper end of the temp range.
Within the MSP430F2xx family, the MSP430F2131 is the base part; the TRGER suffix denotes the tape-and-reel, 24-VQFN package variant. Pin-compatible siblings with different Flash/RAM densities exist in the same package — check the TI MSP430F2xx selector guide for a density match to your firmware size.
Yes. The MSP430 architecture is designed for low-power operation, with multiple sleep modes and a 16-bit RISC core that wakes quickly.