Skip to main content
Log in
Texas Instruments MSP430F2013IPW — Microcontrollers & Processors (MCU / MPU / DSP)

Texas Instruments MSP430F2013IPW 16-bit MCU, 16 MHz

MPNMSP430F2013IPW
Active

Texas Instruments MSP430F2013IPW, MSP430F2xx series, 16-bit MSP430 CPU16 core at 16 MHz, 2 KB Flash/128 B RAM, I²C and SPI, 10-channel 16-bit A/D, 1.8–3.6 V, −40 to 85 °C, 14-TSSOP in tube.

$4.6600Ref. price · indicative, final on quote
Texas Instruments MSP430F2013IPW datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

MSP430F2013IPW specifications
ParameterValue
SeriesMSP430F2xx
MountingSurface Mount
Oscillator typeInternal
Program memory typeFLASH
Voltage - supply (Vcc (Vdd))1.8V ~ 3.6V
Operating temperature-40°C~85°C(TA)
Speed16MHz
PackageTube
RAM size128 x 8
Core size16-Bit
PeripheralsBrown-out Detect/Reset, POR, PWM, WDT
ConnectivityI²C, SPI
Number of i (O)10
Core processorMSP430 CPU16
Case14-TSSOP (0.173\", 4.40mm Width)
Data convertersA/D 10x16b
Program memory size2KB (2K x 8 + 256B)

Product details

16 MHz MSP430 with a 10-channel 16-bit ADC on board

Housed in a 14-TSSOP package, this is a small-footprint MCU aimed at low-power sensor and control applications where the onboard ADC eliminates an external converter.

Memory and ADC — what fits and what does not

With 2 KB of Flash and 128 bytes of RAM, this part is sized for a single control loop, a few state variables, and a modest lookup table. The 10-channel 16-bit ADC can sample up to ten analog inputs without an external mux, which suits multi-sensor nodes (temperature, pressure, light) where each channel gets its own pin. If your application needs more than 2 KB of code space or any significant data buffering, you are looking at the wrong density tier — step up to the MSP430F2xx parts with 4 KB or 8 KB Flash.

For a production BOM, this means you can qualify the part for new designs without planning a near-term respin.

Frequently asked questions

Can MSP430F2013IPW be used with a 3.3 V supply?

Yes. At 3.3 V the internal regulator and ADC reference operate correctly, and the 16 MHz core speed is supported across the full temperature range.

What is the difference between MSP430F2013IPW and MSP430F2012IPW?

The MSP430F2012IPW is a lower-density sibling: it has 1 KB of Flash and no 16-bit ADC. The MSP430F2013IPW doubles the Flash to 2 KB and adds the 10-channel 16-bit A/D converter. Both share the same 14-TSSOP package, 16-bit CPU16 core, and peripheral set otherwise. If you need the ADC or the extra code space, the F2013 is the right pick.