Skip to main content
Texas Instruments MSP430F110IDWR — Microcontrollers & Processors (MCU / MPU / DSP)

Texas Instruments MSP430F110IDWR 16-bit MCU, 8 MHz

MPNMSP430F110IDWR
Obsolete

Texas Instruments MSP430x1xx MSP430F110IDWR, 16-Bit MSP430 CPU16, 8MHz, 1KB (1K x 8 + 128B) FLASH, 128 x 8 RAM, 14 I/O, POR PWM WDT, 1.8V~3.6V, -40°C~85°C, 20-SOIC.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

MSP430F110IDWR specifications
ParameterValue
SeriesMSP430x1xx
MountingSurface Mount
Oscillator typeInternal
Program memory typeFLASH
Voltage - supply (Vcc (Vdd))1.8V ~ 3.6V
Operating temperature-40°C~85°C(TA)
Speed8MHz
PackageTape & Reel (TR)
RAM size128 x 8
Core size16-Bit
PeripheralsPOR, PWM, WDT
Number of i (O)14
Core processorMSP430 CPU16
Case20-SOIC (0.295\", 7.50mm Width)
Program memory size1KB (1K x 8 + 128B)

Product details

16-bit MSP430 for low-power control — 1 KB Flash, 8 MHz core

It carries 1 KB of program Flash and 128 bytes of RAM, runs at up to 8 MHz, and includes 14 general-purpose I/O lines plus on-chip peripherals: a power-on-reset (POR), a PWM timer, and a watchdog timer (WDT).

20-SOIC wide-body — footprint and reflow notes

The 1.27 mm pitch leaves room for manual rework if needed. Check the MSL before the reflow oven — the tape-and-reel delivery (the 'R' suffix) is the standard production format, but the moisture sensitivity level governs bake requirements if the sealed bag has been opened beyond its floor-life window.

No official direct replacement has been listed by TI for this specific order code. Supply is limited to remaining factory stock and surplus inventory held by independent distributors.

Frequently asked questions

What is the replacement for MSP430F110IDWR?

Texas Instruments has not published an official direct replacement order code for the MSP430F110IDWR. The MSP430 family includes many pin-compatible and software-compatible devices with larger memory and higher performance, but a specific drop-in substitute has not been designated by the manufacturer. For a BOM continuity review, contact us with your application requirements.