Skip to main content
Log in
Texas Instruments MSP430F1101AIPW — Microcontrollers & Processors (MCU / MPU / DSP)

Texas Instruments MSP430F1101AIPW 16-bit MCU, 8 MHz

MPNMSP430F1101AIPW
Active

Texas Instruments MSP430x1xx series, MSP430F1101AIPW, 16-Bit MCU, 8 MHz, 1 KB Flash, 128 x 8 RAM, 14 I/O, 1.8 V to 3.6 V supply, -40°C to 85°C, 20-TSSOP.

$4.8100Ref. price · indicative, final on quote
Texas Instruments MSP430F1101AIPW datasheet (PDF)
Packaging20-TSSOP (0.173", 4.40mm Width)
RoHSROHS3 Compliant
SeriesMSP430x1xx
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

MSP430F1101AIPW specifications
ParameterValue
SeriesMSP430x1xx
MountingSurface Mount
Oscillator typeInternal
Program memory typeFLASH
Voltage - supply (Vcc (Vdd))1.8V ~ 3.6V
Operating temperature-40°C~85°C(TA)
Speed8MHz
PackageTube
RAM size128 x 8
Core size16-Bit
PeripheralsPOR, WDT
Number of i (O)14
Core processorMSP430 CPU16
Case20-TSSOP (0.173\", 4.40mm Width)
Data convertersSlope A/D
Program memory size1KB (1K x 8 + 256B)

Product details

It runs at 8 MHz with an internal oscillator, delivering enough throughput for low-duty-cycle sensor readout, simple control loops, and battery-monitoring tasks where every microamp matters. The 1 KB Flash program memory and 128 x 8 RAM footprint force a disciplined firmware layout — no room for a full RTOS or large lookup tables.

On-chip peripherals and memory type

Program memory is Flash, which supports in-system reprogramming for firmware updates during development or field service. The integrated POR and WDT peripherals reduce external component count for reset and watchdog supervision. The slope A/D converter provides a single-channel analog input without needing an external ADC — adequate for thermistor or potentiometer readout at moderate update rates.

It is RoHS3 compliant.

Frequently asked questions

How much Flash and RAM does the MSP430F1101AIPW have?

The MSP430F1101AIPW has 1 KB of Flash program memory (organized as 1K x 8 plus 256 bytes) and 128 x 8 bits of RAM. This is a tight memory footprint — firmware must be lean, with no room for a full RTOS or large data buffers.

What is the MSP430F1101AIPW's core speed?

The MSP430 CPU16 core runs at 8 MHz using an internal oscillator. That clock rate is sufficient for low-duty-cycle sensor polling, simple control loops, and battery-monitoring tasks where power efficiency is the priority over raw throughput.