STMicroelectronics MC33078DR, General Purpose Dual Op Amp, 16 MHz Gain Bandwidth, 7 V/µs Slew Rate, 10 V to 36 V Supply, 8-SOIC Package, -40°C to 85°C.
| Parameter | Value |
|---|---|
| Mounting | Surface Mount |
| Amplifier type | General Purpose |
| Voltage - input offset | 150 µV |
| Voltage - supply span | 36 V |
| Current - supply | 2.05mA (x2 Channels) |
| Current - input bias | 300 nA |
| Current - output (Channel) | 37 mA |
| Operating temperature | -40°C ~ 85°C (TA) |
| Gain bandwidth product | 16 MHz |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Slew rate | 7V/µs |
| Case | 8-SOIC (0.154\", 3.90mm Width) |
| Number of circuits | 2 |
The STMicroelectronics MC33078DR is a general-purpose dual operational amplifier in an 8-SOIC package. It delivers a 16 MHz gain-bandwidth product and a 7 V/µs slew rate.
The SOIC-8 package is surface-mount only; the tape-and-reel option (also available as cut tape) feeds standard pick-and-place lines.
The MC33078DR is a direct pin-for-pin replacement for any dual op amp in an SOIC-8 footprint, including the LM358. However, the supply voltage minimum of 10 V means it will not run on a 5 V rail like the LM358 can — check your supply voltage before substituting.
Yes, the MC33078DR is supplied in an 8-SOIC package (0.154" width, 3.90 mm body width), which is the standard footprint for dual op amps. It is available in tape-and-reel or cut-tape options.
No, the MC33078DR is not a rail-to-rail op amp. Its output swing is limited to within about 1.5 V of each supply rail under typical loads. For rail-to-rail output, consider a part like the TLV9362IDDFR.