Skip to main content
Texas Instruments MAX3223MDBREP — Sensors & Transducers
Texas Instruments

MAX3223MDBREP RS-232 Transceiver - Texas Instruments

MPNMAX3223MDBREP
End of Life

Texas Instruments MAX3223MDBREP, RS-232 transceiver, full duplex, 2 drivers / 2 receivers, 250 kbps data rate, 3V to 5.5V supply, -55°C to 125°C, 20-SSOP package.

$7.15Ref. price · indicative, final on quote
MAX3223MDBREP datasheet
Packaging20-SSOP (0.209", 5.30mm Width)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

MAX3223MDBREP Technical Specifications
ParameterValue
TypeTransceiver
Mounting typeSurface Mount
Voltage3V ~ 5.5V
ProtocolRS232
Operating temperature-55°C ~ 125°C
DuplexFull
PackageTape & Reel (TR); Cut Tape (CT)
Data rate250kbps
Case20-SSOP (0.209\", 5.30mm Width)
Receiver hysteresis500 mV
Number of drivers (Receivers)2/2

Product details

RS-232 link for extreme-temperature serial ports

Its operating temperature span of -55°C to 125°C qualifies it for avionics, downhole instrumentation, and military comms links where commercial-grade RS-232 parts fail.

Noise margin and supply flexibility

Receiver hysteresis is specified at 500 mV, which gives the serial link margin against ground shifts and crosstalk on long cable runs — a practical advantage in factory-floor or vehicle harness installations. The single-supply range from 3V to 5.5V means the transceiver can run off a 3.3V logic rail or a 5V legacy bus without a separate RS-232 charge-pump supply, reducing BOM count.

Active production, ROHS3, and sourcing posture

For BOM planning: the part is sourced per RFQ against your quantity.

Frequently asked questions

Is MAX3223MDBREP a direct replacement for MAX3223ECPE?

The MAX3223ECPE is a different package (16-PDIP) and temperature grade. The MAX3223MDBREP is a 20-SSOP surface-mount part with the -55°C to 125°C range. They are not pin-compatible; verify the board footprint and environmental requirements before substituting.

What is the difference between MAX3223 and MAX3232?

The MAX3223 is a 2-driver/2-receiver full-duplex transceiver. The MAX3232 is also a 2/2 device but typically operates at a lower data rate (250 kbps vs 250 kbps — same nominal rate) and may have different receiver hysteresis or supply range. Check the respective datasheets for exact parametric differences.

Is MAX3223MDBREP RoHS compliant?

Yes, it is listed as ROHS3 Compliant.