Texas Instruments MAX232IDW, RS-232 transceiver, full duplex, 2 drivers / 2 receivers, 120 kbps data rate, 4.5 V to 5.5 V supply, 16-SOIC package, -40°C to 85°C.
| Parameter | Value |
|---|---|
| Type | Transceiver |
| Mounting | Surface Mount |
| Supply voltage | 4.5V ~ 5.5V |
| Protocol | RS232 |
| Operating temperature | -40°C~85°C |
| Duplex | Full |
| Package | Tube |
| Data rate | 120Kbps |
| Case | 16-SOIC (0.295\", 7.50mm Width) |
| Receiver hysteresis | 500 mV |
| Number of drivers (Receivers) | 2/2 |
It handles asynchronous serial communication up to 120 kbps, with the charge-pump generating the ±10 V swing from a single 5 V supply. The 500 mV receiver hysteresis provides noise margin on the bus, useful in industrial environments where cable runs pick up interference.
The 120 kbps data rate covers legacy UART speeds (9600, 19200, 38400 baud) and most RS-232 applications below 115.2 kbps.
The MAX232IDW is available to order through independent distribution.
No. For 3.3 V RS-232, consider the MAX3232 family.
The MAX232IDW is limited to 5 V and 120 kbps but is otherwise pin-compatible in the same 16-SOIC footprint.