Skip to main content
Texas Instruments LT1013IP — Logic ICs
Texas Instruments

LT1013IP Dual General-Purpose Op-Amp, 1 MHz, 8-DIP

MPNLT1013IP
End of Life

Linear Technology LT1013IP, dual general-purpose operational amplifier, 1 MHz gain bandwidth, 0.4 V/µs slew rate, 60 µV input offset, 350 µA supply per channel, 5 V to 30 V supply, 8-DIP through-hole package.

$1.64Ref. price · indicative, final on quote
LT1013IP datasheet
Packaging8-DIP (0.300", 7.62mm)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

LT1013IP Technical Specifications
ParameterValue
Mounting typeThrough Hole
Amplifier typeGeneral Purpose
Voltage - input offset60 µV
Voltage - supply span30 V
Current - supply350µA (x2 Channels)
Current - input bias15 nA
Current - output (Channel)20 mA
Gain bandwidth product1 MHz
PackageBulk
Slew rate0.4V/µs
Case8-DIP (0.300\", 7.62mm)
Number of circuits2

Product details

Dual precision op-amp in a through-hole DIP

The 60 µV typical input offset voltage makes it suitable for precision signal conditioning in industrial control, instrumentation, and sensor interface circuits where through-hole assembly is preferred.

The 5 V to 30 V supply span covers common industrial rails (5 V, 12 V, 15 V, 24 V) without needing a separate regulator. The 350 µA per channel quiescent current keeps the thermal budget low in multi-channel boards and extends battery life in portable instrumentation.

Through-hole package — prototyping and legacy sockets

The 8-DIP (0.300", 7.62 mm) package with through-hole mounting suits breadboard prototyping, socketed designs, and rework-friendly assemblies. The supplier device package is 8-PDIP. For new designs requiring surface-mount, consider the LT1013CN8 or a modern SMD alternative, but the DIP remains widely used in test equipment and low-volume production where hand-soldering is the norm.

Frequently asked questions

Is the LT1013IP obsolete or active?

The part is RoHS non-compliant.

Can LT1013IP be used as a comparator?

The LT1013IP is a general-purpose op-amp, not a comparator. Its output stage is not designed for open-loop comparator operation with fast overdrive recovery; a dedicated comparator like the LT1016 or LM393 would be a better fit for that role.

What is the LT1013IP equivalent or replacement?

The LT1013IP is a dual op-amp in a through-hole DIP. A modern surface-mount equivalent with similar DC precision is the TLV9362IDDFR (dual, 10.6 MHz, rail-to-rail output), but note the different package and supply voltage range. For a pin-compatible through-hole replacement, the LT1013CN8 is the same die in a PDIP-8 package.