Texas Instruments LPV802DGKT, General Purpose dual op-amp, 8 kHz GBW, 0.0021 V/µs slew rate, rail-to-rail output, 1.6 V to 5.5 V supply, 320 nA supply per channel, 8-VSSOP package, -40°C to 125°C.
| Parameter | Value |
|---|---|
| Output type | Rail-to-Rail |
| Mounting | Surface Mount |
| Amplifier type | General Purpose |
| Voltage - input offset | 550 µV |
| Voltage - supply span | 5.5 V |
| Current - supply | 320nA (x2 Channels) |
| Current - input bias | 0.1 pA |
| Current - output (Channel) | 4.7 mA |
| Operating temperature | -40°C ~ 125°C |
| Gain bandwidth product | 8 kHz |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Slew rate | 0.0021V/µs |
| Case | 8-TSSOP, 8-MSOP (0.118\", 3.00mm Width) |
| Number of circuits | 2 |
The Texas Instruments LPV802DGKT is a dual-channel general-purpose operational amplifier in an 8-VSSOP package, designed for applications where supply current is the binding constraint. The 8 kHz gain-bandwidth product and 0.0021 V/µs slew rate tell you this is not a high-speed part — it is sized for DC and low-frequency signal conditioning, not audio or control loops above a few hundred hertz.
Yes, the output type is rail-to-rail, meaning the output can swing within millivolts of both supply rails.
The TLV9362IDDFR is a dual general-purpose op-amp in a similar package, but it draws 2.6 mA per channel and offers 10.6 MHz GBW — a different power/bandwidth trade-off. For a direct micropower replacement, stay within the LPV80x family; the TLV9362IDDFR is not a pin-compatible second source.