Dual-channel op amp in a small footprint
The LPV358MMX/NOPB is a general-purpose operational amplifier from Texas Instruments, packing two independent circuits into an 8-VSSOP package (3.00 mm width). Each channel draws just 15 µA supply current, making this a fit for battery-powered or power-budgeted designs where every microamp counts. The rail-to-rail output stage swings within millivolts of both supply rails, preserving dynamic range in low-voltage single-supply applications from 2.7 V to 5 V.
Bandwidth and drive for signal conditioning
With a gain-bandwidth product of 152 kHz and a slew rate of 0.1 V/µs, this op amp is suited for low-frequency sensor conditioning, DC amplification, and active filtering below 10 kHz. Each channel can source or sink up to 16 mA, enough to drive an ADC input, a reference buffer, or a small signal load directly. Input offset voltage is 1.5 mV typical, and input bias current is 2 nA — adequate for general-purpose analog interfaces where precision below 1 mV is not required.
Temperature range and supply flexibility
Rated for operation from -40°C to 85°C, the LPV358MMX/NOPB covers industrial temperature environments — control boards, sensor interfaces, and outdoor equipment enclosures. The 2.7 V to 5 V supply span means it runs from a single lithium cell, a 3.3 V rail, or a regulated 5 V bus without needing a split supply. Surface-mount assembly in the 8-VSSOP footprint (MSOP-8 compatible) keeps the board area small — the 0.118-inch body width fits tight layouts.
Lifecycle and compliance status
Fully ROHS3 compliant, with no restricted substances above threshold levels per the current EU directive. Supplied in Tape & Reel or Cut Tape options — the reel format suits automated pick-and-place for volume assembly; Cut Tape works for prototyping or low-quantity builds.