Skip to main content
Texas Instruments LP2980AIM5-3.8/NOPB — Power Management (PMIC / Gate Driver)

LP2980AIM5-3.8/NOPB LDO Regulator, 3.8V Fixed, 50mA

MPNLP2980AIM5-3.8/NOPB
Obsolete

Texas Instruments LP2980 series, Linear Voltage Regulator IC, Positive Fixed 1 Output 50mA SC-74A, SOT-753, -40°C~125°C.

Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

LP2980AIM5-3.8/NOPB specifications
ParameterValue
Output typeFixed
MountingSurface Mount
Voltage - input16V
Voltage dropout0.22V @ 50mA
Voltage - output (Min (Fixed))3.8V
Output current50mA
Current - supply1.2 mA
Current - quiescent95 µA
Operating temperature-40°C~125°C
PSRR63dB (1kHz)
PackageTape & Reel (TR)
CaseSC-74A, SOT-753
Control featuresEnable
Protection featuresOver Current, Over Temperature, Short Circuit
Number of regulators1
Output configurationPositive

Product details

50 mA fixed 3.8 V LDO with 63 dB PSRR

This is a single-output, positive fixed LDO regulator delivering 50 mA at a nominal 3.8 V. The 63 dB PSRR at 1 kHz makes it a candidate for post-switcher clean-up in analog or RF supply rails where ripple rejection matters. Dropout voltage is 0.22 V max at 50 mA, so the input rail can sit as low as 4.02 V and still maintain regulation — useful in battery-powered designs where the cell voltage decays. The low Iq suits always-on or sleep-mode loads where every microamp is budgeted.

Industrial temperature range and protection

Built-in protection includes overcurrent, overtemperature, and short-circuit shutdown — no external watchdog needed for basic fault containment. An Enable pin (active-high logic) allows the regulator to be gated by a GPIO or power-good signal, dropping the output to zero and reducing quiescent draw to near-zero in shutdown.

SOT-23-5 package and footprint

Housed in a 5-pin SOT-23 (SC-74A / SOT-753), the LP2980AIM5-3.8/NOPB is a surface-mount device.

Frequently asked questions

Where can I buy LP2980AIM5-3.8/NOPB?

This part is obsolete and not stocked by the manufacturer. Contact us with your target quantity to receive a current price and availability confirmation.

Does LP2980AIM5-3.8/NOPB have overcurrent protection?

Yes, the LP2980AIM5-3.8/NOPB includes overcurrent, overtemperature, and short-circuit protection features, providing basic fault containment without external components.