Skip to main content
Log in
Texas Instruments LMV981MG/NOPB — Memory (DRAM / SRAM / Flash / EEPROM)

TI LMV981MG/NOPB General-Purpose Op-Amp, SC-70-6, 1.5 MHz

MPNLMV981MG/NOPB
End of Life

Texas Instruments LMV981MG/NOPB, General Purpose Amplifier, 1 Circuit, Rail-to-Rail, 1.5 MHz, 0.42V/µs, 1.8V to 5V, 116µA, SC-70-6, -40°C to 125°C.

$1.68Ref. price · indicative, final on quote
Texas Instruments LMV981MG/NOPB datasheet (PDF)
Packaging6-TSSOP, SC-88, SOT-363
RoHSROHS3 Compliant
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

LMV981MG/NOPB specifications
ParameterValue
Output typeRail-to-Rail
MountingSurface Mount
Amplifier typeGeneral Purpose
Voltage - input offset1 mV
Voltage - supply span1.8 V
Current - supply116µA
Current - input bias14 nA
Current - output (Channel)100 mA
Operating temperature-40°C ~ 125°C
Gain bandwidth product1.5 MHz
PackageTape & Reel (TR); Cut Tape (CT)
Slew rate0.42V/µs
Case6-TSSOP, SC-88, SOT-363
Number of circuits1

Product details

1.5 MHz general-purpose op-amp in a SC-70-6 — what it fits

The Texas Instruments LMV981MG/NOPB is a single general-purpose op-amp with rail-to-rail output, a 1.5 MHz gain-bandwidth product, and a 0.42 V/µs slew rate. The SC-70-6 package keeps board area tight. Temperature range is -40°C to 125°C, so it handles industrial and automotive cabin environments without a grade split.

Supply range and quiescent current — battery-duty fit

At 116 µA supply current it stays on continuously in a battery-powered sensor node.

Rail-to-rail output and input offset — single-supply signal chain

Rail-to-rail output means the amplifier can swing within millivolts of the supply rails, which matters when the supply is only 1.8 V and every millivolt of headroom counts.

Lifecycle and sourcing — active, no LTB clock

Frequently asked questions

Is LMV981MG/NOPB a rail-to-rail op amp?

Yes, the output type is rail-to-rail, which allows the output to swing close to the supply rails — important for headroom at low supply voltages.

Is LMV981MG/NOPB suitable for battery-powered applications?

Yes. The 1.8 V minimum supply lets it run from a single Li-ion cell, and the 116 µA quiescent current makes it suitable for always-on sensor conditioning in battery-powered designs.

What are the alternatives or equivalents for LMV981MG/NOPB?

A close functional peer is the TLV9351IDCKR, also a single general-purpose rail-to-rail op-amp in a similar package. The TLV9351 offers a higher 3.5 MHz GBW and 20 V/µs slew rate but draws 600 µA supply current — a trade-off of speed versus quiescent power. The LMV981MG/NOPB is the lower-power pick for battery-duty signal chains.