Texas Instruments LMV932MA/NOPB, general-purpose dual op-amp, 1.5 MHz gain bandwidth, rail-to-rail output, 8-SOIC package, active production.
| Parameter | Value |
|---|---|
| Output type | Rail-to-Rail |
| Mounting | Surface Mount |
| Amplifier type | General Purpose |
| Voltage - input offset | 1 mV |
| Voltage - supply span | 5.5 V |
| Current - supply | 116µA (x2 Channels) |
| Current - input bias | 14 nA |
| Current - output (Channel) | 100 mA |
| Operating temperature | -40°C ~ 125°C (TA) |
| Gain bandwidth product | 1.5 MHz |
| Package | Tube |
| Slew rate | 0.42V/µs |
| Case | 8-SOIC (0.154\", 3.90mm Width) |
| Number of circuits | 2 |
Its rail-to-rail output stage allows the signal to swing within millivolts of the supply rails, maximizing dynamic range in low-voltage systems. Each channel draws 116 µA supply current, keeping the total power budget under 0.6 mW per amplifier at 5 V.
It is ROHS3 compliant, and the standard 8-SOIC package (0.154-inch width) is widely stocked across distribution channels.
The gain bandwidth product is 1.5 MHz, which sets the closed-loop bandwidth for a given gain — for example, a gain of 10 yields a 150 kHz small-signal bandwidth.
Yes, the output type is rail-to-rail, meaning the output can swing within a few millivolts of the positive and negative supply rails, maximizing dynamic range in low-voltage designs.
The LMV932MA/NOPB is the lead-free (ROHS3 compliant) version of the LMV932MA. Electrically identical, it is a drop-in replacement in the same 8-SOIC footprint.