Skip to main content
Log in
Texas Instruments LMV862MM/NOPB — Analog & Data Acquisition

LMV862MM/NOPB Texas Instruments Dual CMOS Op-Amp, 31 MHz

MPNLMV862MM/NOPB
End of Life

Texas Instruments LMV862MM/NOPB, LMV® series, dual CMOS rail-to-rail op-amp, 31 MHz GBW, 20 V/µs slew rate, 2.7 V to 5.5 V supply, 150 mA output per channel, -40 to 125°C, 8-VSSOP package.

$3.2Ref. price · indicative, final on quote
Texas Instruments LMV862MM/NOPB datasheet (PDF)
Packaging8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
RoHSROHS3 Compliant
SeriesLMV®
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

LMV862MM/NOPB specifications
ParameterValue
SeriesLMV®
Output typeRail-to-Rail
MountingSurface Mount
Amplifier typeCMOS
Voltage - input offset273 µV
Voltage - supply span5.5 V
Current - supply4.85mA (x2 Channels)
Current - input bias0.1 pA
Current - output (Channel)150 mA
Operating temperature-40°C ~ 125°C
Gain bandwidth product31 MHz
PackageTape & Reel (TR); Cut Tape (CT)
Slew rate20V/µs
Case8-TSSOP, 8-MSOP (0.118\", 3.00mm Width)
Number of circuits2

Product details

What this dual CMOS op-amp brings to the board

Output current per channel is 150 mA.

Ratings that decide the fit

The 31 MHz GBW and 20 V/µs slew rate define the small-signal bandwidth. The 0.1 pA input bias current means negligible offset from the source impedance. The 273 µV input offset voltage is typical for a CMOS amp at this speed.

The 8-VSSOP (0.118-inch, 3.00 mm body width) is a standard surface-mount footprint. The /NOPB suffix confirms ROHS3 compliance.

No NRND or EOL notice is on record. If you are dual-sourcing for supply resilience, the closest functional peer in the same speed-and-drive class is the TLV9362IDDFR (10.6 MHz GBW, 25 V/µs slew rate, 2.6 mA supply per channel), though the pinout and package should be verified against your layout.

Frequently asked questions

What is the equivalent or replacement for LMV862MM/NOPB?

There is no direct pin-compatible second source listed. A functional peer in the same speed-and-drive class is the TLV9362IDDFR (10.6 MHz GBW, 25 V/µs slew rate, rail-to-rail output), but verify the pinout and package compatibility for your layout.

What is the difference between LMV862MM and LMV862MM/NOPB?

The /NOPB suffix indicates ROHS3 compliance (no lead). The LMV862MM without the suffix is the same electrical part but may have been produced before the ROHS3 transition. The /NOPB variant is the current ordering code.