8 MHz CMOS dual op-amp for signal-conditioning chains
The LMV852MME/NOPB: The input bias current is just 0.1 pA, and input offset voltage is 260 µV.
Supply current and battery-powered design fit
At 820 µA per channel, the LMV852MME/NOPB is well-suited for battery-operated equipment where every microamp matters. The 0.1 pA input bias current also preserves signal integrity in high-impedance sensor interfaces — think photodiode amplifiers or pH probe buffers — without adding offset drift from bias current. The 65 mA output current per channel provides enough drive to swing a typical ADC input or a small headphone load.
Lifecycle and compliance
The NOPB suffix confirms lead-free (RoHS) construction — no exemption-based Pb content.
Package and footprint note
The supplier device package is 8-VSSOP (MSOP-8, 3.00 mm width). It is a surface-mount part with a standard 0.65 mm pitch. The package is small enough for dense layouts, but the thermal pad is not exposed — dissipation relies on the copper plane on the PCB. For continuous output current near the 65 mA limit, ensure adequate board-level heatsinking.