Texas Instruments LMV851MGX/NOPB, General Purpose Op Amp, 1 Circuit, Rail-to-Rail Output, 8 MHz Gain Bandwidth, 4.5 V/µs Slew Rate, 2.7 V to 5.5 V Supply, SC-70-5 Package, -40°C to 125°C.
| Parameter | Value |
|---|---|
| Output type | Rail-to-Rail |
| Mounting | Surface Mount |
| Amplifier type | General Purpose |
| Voltage - input offset | 260 µV |
| Voltage - supply span | 5.5 V |
| Current - supply | 430µA |
| Current - input bias | 0.1 pA |
| Current - output (Channel) | 65 mA |
| Operating temperature | -40°C ~ 125°C |
| Gain bandwidth product | 8 MHz |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Slew rate | 4.5V/µs |
| Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of circuits | 1 |
The LMV851MGX/NOPB: Supply draw sits at 430 µA typical, and it can deliver 65 mA per channel — a good efficiency ratio for battery-powered or multi-channel boards where every milliwatt counts.
That full industrial-plus range is one less derating step to check when the board sees a hot enclosure or cold start.
The supplier device package is SC-70-5.
The TLV9351 trades lower GBW for higher slew rate and slightly lower offset, so it is a direct cross-shop candidate for applications where slew rate matters more than bandwidth.