Texas Instruments LMV® series, LMV832MME/NOPB, CMOS dual operational amplifier, 3.3 MHz gain bandwidth, 2 V/µs slew rate, 470 µA supply per channel, 2.7 V to 5.5 V supply, 8-VSSOP package, -40°C to 125°C.
| Parameter | Value |
|---|---|
| Series | LMV® |
| Mounting | Surface Mount |
| Amplifier type | CMOS |
| Voltage - input offset | 250 µV |
| Voltage - supply span | 5.5 V |
| Current - supply | 470µA (x2 Channels) |
| Current - input bias | 0.1 pA |
| Current - output (Channel) | 66 mA |
| Operating temperature | -40°C ~ 125°C |
| Gain bandwidth product | 3.3 MHz |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Slew rate | 2V/µs |
| Case | 8-TSSOP, 8-MSOP (0.118\", 3.00mm Width) |
| Number of circuits | 2 |
It delivers a gain bandwidth product of 3.3 MHz with a 2 V/µs slew rate, drawing 470 µA per channel from a 2.7 V to 5.5 V supply. This combination suits battery-powered sensor interfaces, portable instrumentation, and multichannel signal conditioning where low power and rail-to-rail output are needed.
No last-time-buy or end-of-life notices are on record.
A close functional peer is the TLV9351IDCKR, a single-channel CMOS op-amp with 3.5 MHz GBW and 20 V/µs slew rate. It draws 600 µA supply current and is pin-compatible in the same SC-70 package family, but note it is a single-channel part versus the dual LMV832MME/NOPB.
Yes, the LMV832MME/NOPB is ROHS3 compliant.