Skip to main content
Texas Instruments LMV824MX/NOPB — Logic ICs
Texas Instruments

LMV824MX/NOPB Texas Instruments Quad Op-Amp, 5.6 MHz

MPNLMV824MX/NOPB
End of Life

Texas Instruments LMV® series LMV824MX/NOPB, quad general-purpose op-amp, 5.6 MHz gain bandwidth, 2 V/µs slew rate, rail-to-rail output, 2.5 V to 5.5 V supply, 1 mA per channel, 45 mA output, -40°C to 85°C, 14-SOIC.

$1.8Ref. price · indicative, final on quote
LMV824MX/NOPB datasheet
Packaging14-SOIC (0.154", 3.90mm Width)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

LMV824MX/NOPB Technical Specifications
ParameterValue
SeriesLMV®
Output typeRail-to-Rail
Mounting typeSurface Mount
Amplifier typeGeneral Purpose
Voltage - input offset1 mV
Voltage - supply span5.5 V
Current - supply1mA (x4 Channels)
Current - input bias40 nA
Current - output (Channel)45 mA
Operating temperature-40°C ~ 85°C
Gain bandwidth product5.6 MHz
PackageTape & Reel (TR); Cut Tape (CT)
Slew rate2V/µs
Case14-SOIC (0.154\", 3.90mm Width)
Number of circuits4

Product details

Quad op-amp in a 14-SOIC — what the ratings tell you

The LMV824MX/NOPB: It delivers a 5.6 MHz gain-bandwidth product and a 2 V/µs slew rate — enough for audio-band filtering, sensor signal conditioning, and multi-channel ADC front-ends.

Supply current and output drive — budget impact

Each of the four amplifiers draws 1 mA quiescent supply current, totalling 4 mA for the package. The 45 mA output current per channel drives moderate loads without a separate buffer stage.

Temperature grade and deployment context

The input offset voltage is specified at 1 mV max, and input bias current at 40 nA — both typical for a general-purpose bipolar-input stage. These numbers are adequate for non-critical DC accuracy; if you need microvolt offset or picoamp bias, a CMOS-input op-amp (like the OPA4374) would be the alternative.

Lifecycle status — no LTB concern

ROHS3 compliant.

Frequently asked questions

What is a replacement for LMV824MX/NOPB?

The OPA4374 draws 0.6 mA per channel and operates from 2.7 V minimum. It is not pin-compatible (different package) but serves the same quad general-purpose role with lower bias current and higher temperature rating.