Skip to main content
Log in
LMV822M-NOPB

LMV822M/NOPB Dual General-Purpose Op-Amp, 5.6 MHz

MPNLMV822M/NOPB
End of Life

Texas Instruments LMV® series, LMV822M/NOPB dual general-purpose op-amp, 5.6 MHz gain bandwidth, 2 V/µs slew rate, rail-to-rail output, 2.5 V to 5.5 V supply, 8-SOIC package, -40°C to 85°C.

$2.0Ref. price · indicative, final on quote
Texas Instruments LMV822M/NOPB datasheet (PDF)
Packaging8-SOIC (0.154", 3.90mm Width)
RoHSROHS3 Compliant
SeriesLMV®
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

LMV822M/NOPB specifications
ParameterValue
SeriesLMV®
Output typeRail-to-Rail
MountingSurface Mount
Amplifier typeGeneral Purpose
Voltage - input offset1 mV
Voltage - supply span5.5 V
Current - supply500µA (x2 Channels)
Current - input bias40 nA
Current - output (Channel)45 mA
Operating temperature-40°C ~ 85°C
Gain bandwidth product5.6 MHz
PackageTube
Slew rate2V/µs
Case8-SOIC (0.154\", 3.90mm Width)
Number of circuits2

Product details

Dual op-amp for single-supply signal chains

It delivers a 5.6 MHz gain-bandwidth product and a 2 V/µs slew rate, with rail-to-rail output swing that preserves dynamic range when operating from a single 2.5 V to 5.5 V supply. Each channel draws 500 µA supply current, making it suited for battery-powered or loop-powered sensor interfaces, portable instrumentation, and multi-stage filter circuits where power budget and signal fidelity both matter.

What the key ratings mean for your BOM

Rail-to-rail output means the output can swing within millivolts of the supply rails, critical when driving an ADC input. The 1 mV typical input offset voltage and 40 nA input bias current are typical for a general-purpose bipolar op-amp. For precision DC applications requiring sub-millivolt offset or picoamp bias, a CMOS-input amplifier such as the TLV9351IDCKR (10 pA bias, 350 µV offset) would be the cleaner choice.

Frequently asked questions

What is the difference between LMV822M and LMV822M/NOPB?

The /NOPB suffix indicates lead-free (ROHS3 compliant) plating. The LMV822M base part is the same silicon; the /NOPB variant is the preferred ordering code for new designs requiring RoHS compliance.

What is the pinout of LMV822M/NOPB?

The 8-SOIC package follows the standard dual op-amp pinout: pin 1 = output A, pin 2 = inverting input A, pin 3 = non-inverting input A, pin 4 = V-, pin 5 = non-inverting input B, pin 6 = inverting input B, pin 7 = output B, pin 8 = V+.

What is the equivalent of LMV822M/NOPB?

The TLV9351IDCKR is a single-channel CMOS alternative with 10 pA input bias, 350 µV offset, and 3.5 MHz GBW — not a direct dual replacement but a functional cross-shop for single-channel designs. For a dual-channel pin-compatible alternative, compare the TLV9362IDDFR (10.6 MHz GBW, 25 V/µs slew rate, 2.6 mA supply per channel).