Skip to main content
Log in
Texas Instruments LMV797MM/NOPB — Analog & Data Acquisition

LMV797MM/NOPB Dual Op-Amp, 17 MHz, Rail-to-Rail, 8-VSSOP

MPNLMV797MM/NOPB
End of Life

Texas Instruments LMV797MM/NOPB, LMV® series, dual general-purpose op-amp, 17 MHz gain bandwidth, 11.5 V/µs slew rate, rail-to-rail output, 1.3 mA supply per channel, 8-VSSOP package, -40°C to 125°C.

$2.5Ref. price · indicative, final on quote
Texas Instruments LMV797MM/NOPB datasheet (PDF)
Packaging8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
RoHSROHS3 Compliant
SeriesLMV®
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

LMV797MM/NOPB specifications
ParameterValue
SeriesLMV®
Output typeRail-to-Rail
MountingSurface Mount
Amplifier typeGeneral Purpose
Voltage - input offset100 µV
Voltage - supply span5.5 V
Current - supply1.3mA (x2 Channels)
Current - input bias0.1 pA
Current - output (Channel)60 mA
Operating temperature-40°C ~ 125°C
Gain bandwidth product17 MHz
PackageTape & Reel (TR); Cut Tape (CT)
Slew rate11.5V/µs
Case8-TSSOP, 8-MSOP (0.118\", 3.00mm Width)
Number of circuits2

Product details

Dual op-amp with 17 MHz GBW and rail-to-rail output

The Texas Instruments LMV797MM/NOPB is a dual-channel general-purpose CMOS op-amp from the LMV® series. Input bias current is 0.1 pA, so high-impedance sources like photodiodes or pH probes connect directly without extra buffer stages.

Supply current and thermal range

Each channel draws 1.3 mA supply current. Output can source or sink 60 mA per channel.

The LMV797MM/NOPB comes in an 8-VSSOP package (3.00 mm width, 0.118" pitch). That footprint matches the common MSOP-8 land pattern, so it retrofits into existing layouts designed for similar dual op-amps. Surface-mount only — no through-hole variant.

Frequently asked questions

What is the difference between LMV797MM/NOPB and LMV358?

The LMV797MM/NOPB offers a 17 MHz GBW and 11.5 V/µs slew rate, while the LMV358 is a lower-speed general-purpose op-amp (typically 1 MHz GBW). The LMV797MM/NOPB also has a rail-to-rail output and 0.1 pA input bias current versus the LMV358's bipolar input stage with higher bias current.

What is the pinout of LMV797MM/NOPB?

The LMV797MM/NOPB uses the standard 8-VSSOP pinout: output A (pin 1), inverting input A (pin 2), non-inverting input A (pin 3), V- (pin 4), non-inverting input B (pin 5), inverting input B (pin 6), output B (pin 7), V+ (pin 8).

Can LMV797MM/NOPB replace LMV321?

The LMV321 is a single-channel op-amp, while the LMV797MM/NOPB is a dual. If the circuit uses only one amplifier, the LMV797MM/NOPB can replace it by leaving the second channel unused, but the package and pinout differ. The LMV797MM/NOPB has a higher GBW (17 MHz vs 1 MHz) and rail-to-rail output, so it is a functional upgrade in speed and swing.