What the 17 MHz bandwidth means for signal conditioning
The LMV796MF/NOPB: For a non-inverting gain of 10, the closed-loop bandwidth sits around 1.7 MHz — enough for audio processing, sensor amplification, and ADC driver stages that need clean gain up into the low-MHz range. The 0.1 pA typical input bias current makes this part a practical choice for high-impedance sources like photodiodes or pH probes, where bias current errors would otherwise dominate the offset budget. The 60 mA output current per channel can drive moderate loads like a headphone or a successive-approximation ADC input directly.
The supply span runs from 1.8 V minimum to 5.5 V maximum, covering common single-rail systems from Li-ion battery-powered gear to 5 V logic. Quiescent current is 1.15 mA per amplifier — a reasonable trade-off for the bandwidth on offer. The SOT-23-5 package (SC-74A) is a standard footprint that fits into existing layouts without a board spin.
Sourced to order against your BOM quantity.