88 MHz gain-bandwidth and 35V/µs slew rate
The LMV793MFX/NOPB: This combination means the amplifier can handle fast signal edges up to several MHz without significant slew-induced distortion, making it suitable for ADC driver stages, video buffering, or high-speed sensor conditioning.
Rail-to-rail output and low input bias
The 0.1 pA typical input bias current is negligible for high-impedance sources like photodiode or pH probe front-ends, where bias current error would otherwise dominate the offset budget. Input offset voltage is 100 µV typical, and the amplifier delivers 60 mA output current per channel — enough to drive moderate loads or multiple ADC inputs without an external buffer. Supply current is 1.15 mA typical, a reasonable quiescent draw for an 88 MHz device; the part runs cool in the SOT-23-5 package even at elevated temperatures.
Industrial temperature range and SOT-23-5 footprint
The SOT-23-5 (SC-74A) package is a common, easy-to-assemble footprint with 0.95 mm pitch — no fine-pitch reflow challenges, and it fits on two-layer boards without blind vias.