Texas Instruments LMV772MA/NOPB, LMV® series, dual general-purpose op-amp, 3.5 MHz gain-bandwidth, 1.4 V/µs slew rate, rail-to-rail output, 2.7 V to 5.5 V supply, 600 µA supply current, 8-SOIC package, -40°C to 125°C.
| Parameter | Value |
|---|---|
| Series | LMV® |
| Output type | Differential, Rail-to-Rail |
| Mounting | Surface Mount |
| Amplifier type | General Purpose |
| Voltage - input offset | 250 µV |
| Voltage - supply span | 5.5 V |
| Current - supply | 600µA (x2 Channels) |
| Current - input bias | 0.23 pA |
| Current - output (Channel) | 75 mA |
| Operating temperature | -40°C ~ 125°C |
| Gain bandwidth product | 3.5 MHz |
| Package | Tube |
| Slew rate | 1.4V/µs |
| Case | 8-SOIC (0.154\", 3.90mm Width) |
| Number of circuits | 2 |
The 8-SOIC footprint (3.90 mm width) is a standard layout — no special pad geometry required beyond the usual decoupling at each supply pin.
For a general-purpose amplifier, that bias is low enough to avoid errors from source impedance in the tens of kΩ range — useful for photodiode transimpedance or high-impedance sensor buffers where a bipolar-input amp would add microamp-level error.
Direct source for procurement
Budgeting for BOM cost
Ensure compatibility
Design validation
Production scheduling
Performance upgrade options